Quite a long time ago I had a new garage built https://junglefreedomfighters.com/?p=1320
Not long after it started getting these minging scuffs on the front of it making the whole garage door look a bit rubbish. I couldn’t work out what was causing the problem so every now and then I’d give it a lick of spray paint and it would nice again, for a while.
Recently one of the locking straps snapped so I took it all apart and discovered that some of the plastic circle things that hold the locking straps in place had snapped too. So I ordered a bunch of bits from eBay and set to work. Whilst I was doing all this I noticed that there were scuff marks on the inside of the steel housing that corresponded with the scuff marks on the door. That was it! That was what was cacking up my doors. Upon closer inspection it seemed the top part of the steel housing was bowing down a bit – no idea why but I put a small hole in it with a metal drill, stuck a 100mm torx screw through the hole and screwed it into a roof support above. Screwing the screw in raised the housing top higher and no more scuffing occurred. A jet was and a bit of spray paint later and we have this
